Removed some yellow squiggly lines from the Markdown source

This commit is contained in:
Mark Smith
2022-08-24 17:16:35 -07:00
parent 530e3e65d7
commit c7fc1c23b6
2 changed files with 1 additions and 2 deletions

View File

@ -64,7 +64,6 @@ But in some cases, this isn't possible. eg: A 4-pin TRRS Headset connector whic
## 3.1. Physical ## 3.1. Physical
The connector is an 8P8C Modular connector, commonly ([but incorrectly](https://en.wikipedia.org/wiki/Modular_connector#8P8C)) referred to as an RJ-45. Given that nearly the entire telephony and networking industry has adopted the (technically-incorrect) use of "RJ-45", we will also refer to it as "RJ-45" in this document despite the technically-incorrectness of the term. The connector is an 8P8C Modular connector, commonly ([but incorrectly](https://en.wikipedia.org/wiki/Modular_connector#8P8C)) referred to as an RJ-45. Given that nearly the entire telephony and networking industry has adopted the (technically-incorrect) use of "RJ-45", we will also refer to it as "RJ-45" in this document despite the technically-incorrectness of the term.
The cables used must be wired as TIA-568B. Specifically, OHIS assumes wires are paired as described in TIA-568B: 1&2, 3&6, 4&5, 7&8. (TIA-568A also works for straight-through cables (pairs are on the same pins), but when pair colors are discussed in this document we will use TIA-568B colors.) The cables used must be wired as TIA-568B. Specifically, OHIS assumes wires are paired as described in TIA-568B: 1&2, 3&6, 4&5, 7&8. (TIA-568A also works for straight-through cables (pairs are on the same pins), but when pair colors are discussed in this document we will use TIA-568B colors.)
@ -85,4 +84,4 @@ Shielded cables are preferred, but not required. Either whole-cable shields, li
# 4. Acceptable Compromises # 4. Acceptable Compromises
# 5. Contact and Contribution to the OHIS # 5. Contact and Contribution to the OHIS