From ffb416398082ef55aa9add98071c74c5740b9dab Mon Sep 17 00:00:00 2001 From: mattbk Date: Fri, 15 Sep 2023 19:58:46 -0500 Subject: [PATCH] Wire up keyer. --- vulpes/src/main.cpp | 101 +++++++++++++++++++++----------------------- 1 file changed, 49 insertions(+), 52 deletions(-) diff --git a/vulpes/src/main.cpp b/vulpes/src/main.cpp index 4b27559..2fdae51 100644 --- a/vulpes/src/main.cpp +++ b/vulpes/src/main.cpp @@ -27,7 +27,8 @@ AsyncWebServer server(80); // Assign output variables to GPIO pins -const int keyer = 32; //LED_BUILTIN for on-board (dev);//26 for LED; //32 for transmitter keyer +//LED_BUILTIN for ESP32 onboard LED, 32 for transmitter keyer +const int keyer = 32; const int blinker = LED_BUILTIN; RTC_DS3231 rtc; // set up RTC @@ -63,9 +64,6 @@ bool programRunning; int yourInputStepLength; int yourInputCycleID; int yourInputNtransmitters; -//int step_length = 10000; // 10 secs -//int cycle_id = 1; // number of this transmitter in cycle -//int n_transmitters = 2; //number of transmitters total long start_millis = 0; long stop_millis = 0; long pause_until_millis = 0; @@ -247,8 +245,8 @@ String processor(const String& var){ // Set up arduinomorse pin and default WPM -LEDMorseSender sender(blinker, 10.0f) ; // the 'f' makes sure this is a float -// TODO also for keyer once blinker works +LEDMorseSender sender_blink(blinker, 10.0f) ; // the 'f' makes sure this is a float +LEDMorseSender sender_key(keyer, 10.0f) ; // the 'f' makes sure this is a float // Speed is milliseconds per dit, which is 1000 * (60 / (50 * WPM)) // 60 is 20 wpm, 120 is 10 wpm, 90 is 15 wpm, etc. @@ -264,7 +262,8 @@ void setup() { Serial.begin(115200); // Get arduinomorse ready to go - sender.setup(); + sender_blink.setup(); + sender_key.setup(); pinMode(alarmPin, INPUT_PULLUP); // Set alarm pin as pullup @@ -297,10 +296,10 @@ void setup() { // Initialize the output variables as outputs pinMode(keyer, OUTPUT); - //pinMode(blinker, OUTPUT); + pinMode(blinker, OUTPUT); // Set outputs to LOW digitalWrite(keyer, LOW); - //digitalWrite(blinker, LOW); + digitalWrite(blinker, LOW); // Initialize SPIFFS SPIFFS.begin(true); @@ -327,17 +326,23 @@ void setup() { // On restart, keep doing what you were doing before yourInputMsg_old = yourInputMsg; if(yourInputMsg == 0){ - sender.setMessage(String("test test test de w1cdn ")); + sender_blink.setMessage(String("test test test de w1cdn ")); + sender_key.setMessage(String("test test test de w1cdn ")); } else if(yourInputMsg == 1){ - sender.setMessage(String("moe ")); + sender_blink.setMessage(String("moe ")); + sender_key.setMessage(String("moe ")); } else if(yourInputMsg == 2){ - sender.setMessage(String("moi ")); + sender_blink.setMessage(String("moi ")); + sender_key.setMessage(String("moi ")); } else if(yourInputMsg == 3){ - sender.setMessage(String("mos ")); + sender_blink.setMessage(String("mos ")); + sender_key.setMessage(String("mos ")); } else if(yourInputMsg == 4){ - sender.setMessage(String("moh ")); + sender_blink.setMessage(String("moh ")); + sender_key.setMessage(String("moh ")); } else if(yourInputMsg == 5){ - sender.setMessage(String("mo5 ")); + sender_blink.setMessage(String("mo5 ")); + sender_key.setMessage(String("mo5 ")); } WiFi.mode(WIFI_STA); @@ -392,17 +397,23 @@ void setup() { // Check the message every time the form is submitted. if(yourInputMsg == 0){ - sender.setMessage(String("test test test de w1cdn ")); + sender_blink.setMessage(String("test test test de w1cdn ")); + sender_key.setMessage(String("test test test de w1cdn ")); } else if(yourInputMsg == 1){ - sender.setMessage(String("moe ")); + sender_blink.setMessage(String("moe ")); + sender_key.setMessage(String("moe ")); } else if(yourInputMsg == 2){ - sender.setMessage(String("moi ")); + sender_blink.setMessage(String("moi ")); + sender_key.setMessage(String("moi ")); } else if(yourInputMsg == 3){ - sender.setMessage(String("mos ")); + sender_blink.setMessage(String("mos ")); + sender_key.setMessage(String("mos ")); } else if(yourInputMsg == 4){ - sender.setMessage(String("moh ")); + sender_blink.setMessage(String("moh ")); + sender_key.setMessage(String("moh ")); } else if(yourInputMsg == 5){ - sender.setMessage(String("mo5 ")); + sender_blink.setMessage(String("mo5 ")); + sender_key.setMessage(String("mo5 ")); } } // GET inputStepLength value on /get?inputStepLength= @@ -497,26 +508,6 @@ void setup() { void loop() { - // See which message we are sending - // Only do this when the message has been updated. - // if(yourInputMsg != yourInputMsg_old){ - // if(yourInputMsg == 0){ - // sender.setMessage(String("test test test de w1cdn ")); - // } else if(yourInputMsg == 1){ - // sender.setMessage(String("moe ")); - // } else if(yourInputMsg == 2){ - // sender.setMessage(String("moi ")); - // } else if(yourInputMsg == 3){ - // sender.setMessage(String("mos ")); - // } else if(yourInputMsg == 4){ - // sender.setMessage(String("moh ")); - // } else if(yourInputMsg == 5){ - // sender.setMessage(String("mo5 ")); - // } - // // Keeps the key/led from locking up - // yourInputMsg_old = yourInputMsg; - // } - // This statement from https://github.com/garrysblog/DS3231-Alarm-With-Adafruit-RTClib-Library/blob/master/DS3231-RTClib-Adafruit-Alarm-Poll-alarmFired/DS3231-RTClib-Adafruit-Alarm-Poll-alarmFired.ino // Check if alarm by polling SQW alarm pin if((yourInputSend == 2) & (digitalRead(alarmPin) == LOW)) { @@ -542,33 +533,39 @@ void loop() { // Subtract 2 rather than 1 here to account for start_millis duration at beginning of repeat. pause_until_millis = stop_millis + (yourInputStepLength * (yourInputNtransmitters - 2)); } - //sender.startSending(); programRunning = true; startProgram = false; } // if you want to send continuous code, and it's not sending, then start it up if((yourInputSend == 1)){ - if (!sender.continueSending()){ - // Set the internal counters to the message's beginning. - // Here, this results in repeating the message indefinitely. - sender.startSending(); - } + // If not sending, start sending. Yes, these need to be separate statements. + if (!sender_blink.continueSending()){ + sender_blink.startSending(); + } + if (!sender_key.continueSending()){ + sender_key.startSending(); + } // if you want to send cycle code and it's not sending, then start it up } else if((yourInputSend == 2) & (programRunning == true)){ if((millis() < start_millis)){ // Shut the pin off manually digitalWrite(blinker, LOW); + digitalWrite(keyer, LOW); } else if((millis() >= start_millis) & (millis() <= stop_millis)){ - if (!sender.continueSending()){ - // Set the internal counters to the message's beginning. - // Here, this results in repeating the message indefinitely. - sender.startSending(); + // If not sending, start sending. Yes, these need to be separate statements + // for the blinker and keyer. + if (!sender_blink.continueSending()){ + sender_blink.startSending(); + } + if (!sender_key.continueSending()){ + sender_key.startSending(); } } else if((millis() >= stop_millis) & (millis() <= pause_until_millis)){ // do nothing in this case -- in between cycles // Shut the pin off manually digitalWrite(blinker, LOW); + digitalWrite(keyer, LOW); } else if((millis() >= pause_until_millis)){ startProgram = true; } @@ -577,9 +574,9 @@ void loop() { // do we need something here? // if you don't want to send code } else if(yourInputSend == 0){ - //sender.setMessage(String("")) ; // Not sure this is the right way to stop things. // Shut the pin off manually digitalWrite(blinker, LOW); + digitalWrite(keyer, LOW); } } \ No newline at end of file -- 2.30.2