diff --git a/vulpes/platformio.ini b/vulpes/platformio.ini
index ed7a903..0b3a327 100644
--- a/vulpes/platformio.ini
+++ b/vulpes/platformio.ini
@@ -17,3 +17,4 @@ lib_deps =
 	me-no-dev/AsyncTCP@^1.1.1
 	me-no-dev/ESP Async WebServer@^1.2.3
 	contrem/arduino-timer@^3.0.1
+	kj7rrv/Telegraph@^1.0.0
diff --git a/vulpes/src/main.cpp b/vulpes/src/main.cpp
index a5966d0..fb619eb 100644
--- a/vulpes/src/main.cpp
+++ b/vulpes/src/main.cpp
@@ -17,6 +17,7 @@
 #include <SPIFFS.h>
 #include <Preferences.h>
 #include <arduino-timer.h>
+#include <Telegraph.h>
 
 // download zip from https://github.com/me-no-dev/ESPAsyncWebServer and install.
 #include <ESPAsyncWebServer.h>
@@ -200,6 +201,13 @@ void k(){
 
 // ^^^^
 
+Telegraph telegraph(LED_BUILTIN, 10, HIGH);
+
+
+
+
+
+
 //================================================================================
 // setup(): stuff that only gets done once, after power up (KB1OIQ's description)
 //================================================================================
@@ -285,38 +293,36 @@ void setup() {
   server.onNotFound(notFound);
   server.begin();
 
-
-  // Try to send "K" on startup? What about spaces? Don't use delay();
-  k();
+  telegraph.send("CQ CQ CQ");
 
 }
 
 void loop() {
     // Timers
-    time_until_start.tick();
-    timer.tick();
+  time_until_start.tick();
+  timer.tick();
 
-    String yourInputString = readFile(SPIFFS, "/inputString.txt");
-    // int yourInputInt = readFile(SPIFFS, "/inputInt.txt").toInt();
-    // float yourInputFloat = readFile(SPIFFS, "/inputFloat.txt").toFloat();
 
-    // Blink LED according to seconds entered
-    // if (yourInputInt > 0) {
-    //     Serial.println("GPIO 26 on");
-    //     output26State = "on";
-    //     digitalWrite(output26, HIGH);
-    //     delay(yourInputInt * 1000);
-    //     Serial.println(yourInputInt);
-    //     Serial.println("GPIO 26 off");
-    //     output26State = "off";
-    //     digitalWrite(output26, LOW);
-    //     delay(yourInputInt * 1000);
-    // } else {
-    //     output26State = "off";
-    // }
+  String yourInputString = readFile(SPIFFS, "/inputString.txt");
+  int yourInputInt = readFile(SPIFFS, "/inputInt.txt").toInt();
+  // float yourInputFloat = readFile(SPIFFS, "/inputFloat.txt").toFloat();
 
-   
+  // Blink LED according to seconds entered
+  // if (yourInputInt > 0) {
+  //     Serial.println("GPIO 26 on");
+  //     output26State = "on";
+  //     digitalWrite(output26, HIGH);
+  //     delay(yourInputInt * 1000);
+  //     Serial.println(yourInputInt);
+  //     Serial.println("GPIO 26 off");
+  //     output26State = "off";
+  //     digitalWrite(output26, LOW);
+  //     delay(yourInputInt * 1000);
+  // } else {
+  //     output26State = "off";
+  // }
 
+    
 //   // To access your stored values on inputString, inputInt, inputFloat
 //   String yourInputString = readFile(SPIFFS, "/inputString.txt");
 //   Serial.print("*** Your inputString: ");