diff --git a/src/main.rs b/src/main.rs
index e6cb995..c8efc0b 100644
--- a/src/main.rs
+++ b/src/main.rs
@@ -115,11 +115,20 @@ struct Rig {
     data_bits: DataBits,
     stop_bits: StopBits,
     parity: Parity,
-    s_meter_cat: String
+    s_meter_cat: String,
+    freq_cat: String,
 }
 
 // Create a rig struct
-fn build_rig(name: &str, baud_rate: u32, data_bits: u8, stop_bits: u8, parity: &str, s_meter_cat: &str) -> Rig {
+fn build_rig(
+    name: &str,
+    baud_rate: u32,
+    data_bits: u8,
+    stop_bits: u8,
+    parity: &str,
+    s_meter_cat: &str,
+    freq_cat: &str,
+) -> Rig {
     Rig {
         name: name.to_string(),
         baud_rate,
@@ -128,20 +137,21 @@ fn build_rig(name: &str, baud_rate: u32, data_bits: u8, stop_bits: u8, parity: &
             6 => DataBits::Six,
             7 => DataBits::Seven,
             8 => DataBits::Eight,
-            _ => DataBits::Eight
+            _ => DataBits::Eight,
         },
         stop_bits: match stop_bits {
             1 => StopBits::One,
             2 => StopBits::Two,
-            _ => StopBits::One
+            _ => StopBits::One,
         },
         parity: match parity {
             "none" => Parity::None,
             "odd" => Parity::Odd,
             "even" => Parity::Even,
-            _  => Parity::None,
+            _ => Parity::None,
         },
-        s_meter_cat: s_meter_cat.to_string()
+        s_meter_cat: s_meter_cat.to_string(),
+        freq_cat: freq_cat.to_string(),
     }
 }
 
@@ -149,19 +159,18 @@ fn build_rig(name: &str, baud_rate: u32, data_bits: u8, stop_bits: u8, parity: &
 // https://kevinlynagh.com/notes/match-vs-lookup/
 fn get_rig(x: &str) -> Rig {
     match x {
-        "qmx"     => build_rig("qmx", 9600, 8, 2, "none", "SM"),
-        "ic-7300" => build_rig("ic-7300", 115200, 8, 1, "none", "1502"),
-        _         => {
+        "qmx" => build_rig("qmx", 9600, 8, 2, "none", "SM", "FA"),
+        //"ic-7300" => build_rig("ic-7300", 115200, 8, 1, "none", "1502"),
+        _ => {
             // This prints a message every loop but that's OK.
             println!("Rig '{x}' in rig list. Using default connection values.");
-            build_rig("qmx", 4800, 8, 2, "none", "SM")
-        },
+            build_rig("qmx", 9600, 8, 2, "none", "SM", "FA")
+        }
     }
 }
 
 // Read S-meter
-fn get_smeter(comport: &str, rig_name: &str) -> String {
-
+fn get_smeter(comport: &str, rig_name: &str, frequency: u32) -> String {
     // Get the serial connection info for the rig name
     let rig = get_rig(rig_name);
 
@@ -174,10 +183,21 @@ fn get_smeter(comport: &str, rig_name: &str) -> String {
         .open()
         .expect("Failed to open port");
 
+    // Set the requested frequency
+    let output = format!("{}{};", rig.freq_cat, frequency);
+
+    match port.write(output.as_bytes()) {
+        Ok(_) => {
+            std::io::stdout().flush().unwrap();
+        }
+        Err(ref e) if e.kind() == ErrorKind::TimedOut => (),
+        Err(e) => eprintln!("{:?}", e),
+    }
+
     // Duh, you need the ";" on the end!
     // let output = "FA14075000;"; // set VFO A frequency
     //  let output = "FA;"; // ask for VFO A frequency
-    let output = format!("{};", rig.s_meter_cat);//"SM;"; // ask for S-meter reading
+    let output = format!("{};", rig.s_meter_cat); //"SM;"; // ask for S-meter reading
     // What are we actually sending?
     //dbg!(output.as_bytes());
 
@@ -210,40 +230,6 @@ fn get_smeter(comport: &str, rig_name: &str) -> String {
     }
 }
 
-// Set frequency
-fn set_freq(comport: &str, freq: u32) -> String {
-    let mut port = serialport::new(comport, 4800)
-        .data_bits(DataBits::Eight)
-        .stop_bits(StopBits::Two)
-        .parity(Parity::None)
-        .timeout(Duration::from_millis(100))
-        .open()
-        .expect("Failed to open port");
-
-    // Duh, you need the ";" on the end!
-    //let output = "FA14075000;"; // set VFO A frequency
-    let output = format!("FA{};", freq);
-    //println!("{output}");
-
-    match port.write(output.as_bytes()) {
-        Ok(_) => {
-            std::io::stdout().flush().unwrap();
-        }
-        Err(ref e) if e.kind() == ErrorKind::TimedOut => (),
-        Err(e) => eprintln!("{:?}", e),
-    }
-
-    let mut buf = [0u8; 1024];
-    match port.read(&mut buf) {
-        Ok(_) => {
-            return format!("Frequency set.");
-        }
-        Err(_) => {
-            return format!("Failed to set frequency.");
-        }
-    }
-}
-
 // Write row to a file
 fn write_row(str_arr: [String; 5], file: &String, fmt: &str) -> Result<(), Box<dyn Error>> {
     // From https://docs.rs/csv/latest/csv/tutorial/index.html#writing-csv
@@ -341,9 +327,6 @@ fn main() {
         } //todo!()
     };
 
-    // Set the requested frequency
-    set_freq(&com, frequency);
-
     println!("Press Ctrl + C to quit");
 
     // Simple test loop to make sure we are getting values each time
@@ -354,7 +337,7 @@ fn main() {
         // Get datestamp
         let date = Local::now();
         // Get S-meter
-        let s_val = get_smeter(&com, &rig);
+        let s_val = get_smeter(&com, &rig, frequency);
         //println!("{a}");
         match s_val.parse::<i32>() {
             // Simple graph as we go. Eventually this will be replaced.