Non-working snapshot.

src/main.rs

@@ -2,6 +2,7 @@ use chrono::Local;
 use clap::Parser;
 use nmea::Nmea;
 use nmea::SentenceType;
+use riglib::kenwood::KenwoodRig;
 use serialport::DataBits;
 use serialport::Parity;
 use serialport::StopBits;
@@ -13,7 +14,7 @@ use std::thread::sleep;
 use std::time::Duration;
 use riglib::{Rig as Rig_riglib, ReceiverId};
 use riglib::kenwood::KenwoodBuilder;
-use riglib::kenwood::models::ts_890s;
+use riglib::kenwood::models::ts_990s;
 use riglib::s_units_from_dbm;
 
 /// Command-line arguments using Clap.
@@ -167,7 +168,7 @@ fn get_rig(x: &str) -> Rig {
         "ic-7300" => build_rig("ic-7300", 115200, 8, 1, "none", "1502", "FA"),
         _ => {
             // This prints a message every loop but that's OK.
-            println!("Rig '{x}' in rig list. Using default connection values.");
+            println!("Rig '{x}' not in rig list. Using default connection values.");
             build_rig("qmx", 9600, 8, 2, "none", "SM", "FA")
         }
     }
@@ -334,39 +335,61 @@ async fn main() -> anyhow::Result<()> {
 
     println!("Press Ctrl + C to quit");
 
-    let rig1 = KenwoodBuilder::new(ts_890s())
+ 
-    .serial_port(&com)
-    .build()
-    .await?;
 
-    let info = rig1.info();
-    println!("Connected: {} {}\n", info.manufacturer, info.model_name);
-    let rx = ReceiverId::VFO_A;
-    dbg!(rx);
-    let freq = rig1.get_frequency(ReceiverId::VFO_A).await?;
-    println!("VFO-A: {} Hz", freq);
-    //rig1.set_frequency(ReceiverId::VFO_A,).await?;
-    // let s_val = rig1.get_s_meter(rx).await?;
-    // println!("{s_val}");
-
-    // Simple test loop to make sure we are getting values each time
-    //for _i in 1..11 {
     loop {
         // Get location
         let ll = get_loc(gps.clone());
         // Get datestamp
         let date = Local::now();
-        // Get S-meter
+
-        //let s_val = get_smeter(&com, &rig_name, frequency);
+   // If not QMX, use riglib
+   let mut s_val;
+   let mut s_val_i;
+    if rig_name != "qmx" {
+        let rig1 = KenwoodBuilder::new(ts_990s())
+        .serial_port(&com)
+        .build()
+        .await?;
+
+        //let info = rig1.info();
+        //println!("Connected: {} {}\n", info.manufacturer, info.model_name);
+        let rx = ReceiverId::VFO_A;
+        //let freq = rig1.get_frequency(ReceiverId::VFO_A).await?;
+        //println!("VFO-A: {} Hz", freq);
+
         let s_val = rig1.get_s_meter(rx).await?; // this is failing on the QMX using TS-890 unless I mess with source
-        let s_units = s_units_from_dbm(s_val);
-        //println!("{a}");
         let s_val_i = s_val as i32;
-        // dbg!(n);
+        let s_units = s_units_from_dbm(s_val);
+    } else if rig_name == "qmx" {
+        //println!("Connecting to QMX...");
+        // TODO make both of these numbers eventually
+        
+        let s_val = get_smeter(&com, &rig_name, frequency);
+        let s_val_i = s_val;
+    }
+
+
+        // Get S-meter
+        // If not QMX, use riglib
+    // let s: (String, String, String) = match rig_name {
+    //     "qmx" => {
+    //         let s_val = get_smeter(&com, &rig_name, frequency);
+    //         let s_val_i = s_val;
+    //         (s_val, s_val_i, "".to_string())
+    //     },
+    //     _ => {
+    //         let s_val = rig1.get_s_meter(rx).await?; // this is failing on the QMX using TS-890 unless I mess with source
+    //         let s_units = s_units_from_dbm(s_val);
+    //         let s_val_i = s_val as i32;
+    //         (s_val.to_string(), s_val_i.to_string(), s_units.to_string())
+    //     }
+    // }
+
         println!(
-                "{} {:04} {} {}",
+                "{} {} {} {}",
                 date.format("%Y-%m-%d %H:%M:%S").to_string(),
-                s_val_i,
+                s_val,
                 if s_val_i > 0 {
                 "#".repeat(s_val_i.try_into().unwrap())
                 } else {
@@ -374,16 +397,7 @@ async fn main() -> anyhow::Result<()> {
                 },
                 s_units
             );
-        // match s_val {
+
-        //     // Simple graph as we go. Eventually this will be replaced.
-        //     Ok(n) => println!(
-        //         "{} {} {}",
-        //         date.format("%Y-%m-%d %H:%M:%S").to_string(),
-        //         s_val,
-        //         "#".repeat(n.try_into().unwrap())
-        //     ),
-        //     Err(_e) => todo!(),
-        //}
         // If they provided a file name
         if file_out != "no file" {
             if let Err(err) = write_row(