W1CDN/KK9JEF_DDS_VFO
1
0
Fork 0
mirror of https://github.com/JeffersGlass/DDS_VFO.git synced 2024-11-27 02:37:37 -06:00
Code Issues Packages Projects Releases Wiki Activity
810a91b366
KK9JEF_DDS_VFO/si5351/si5351.cpp

1197 lines
28 KiB
C++
Raw Normal View History

Added support libraries Uploaded Si5351 library and encoder library
2015-09-21 15:45:16 -05:00
/*
* si5351.cpp - Si5351 library for Arduino
*
* Copyright (C) 2015 Jason Milldrum <milldrum@gmail.com>
* Dana H. Myers <k6jq@comcast.net>
*
* Some tuning algorithms derived from clk-si5351.c in the Linux kernel.
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* Rabeeh Khoury <rabeeh@solid-run.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include "Arduino.h"
#include "Wire.h"
#include "si5351.h"
/********************/
/* Public functions */
/********************/
Si5351::Si5351(void)
{
lock_plla = SI5351_CLKNONE;
lock_pllb = SI5351_CLKNONE;
clk0_int_mode = 0;
clk1_int_mode = 0;
clk2_int_mode = 0;
plla_freq = 0ULL;
pllb_freq = 0ULL;
clk0_freq = 0ULL;
clk1_freq = 0ULL;
clk2_freq = 0ULL;
xtal_freq = SI5351_XTAL_FREQ;
}
/*
* init(uint8_t xtal_load_c, uint32_t ref_osc_freq)
*
* Setup communications to the Si5351 and set the crystal
* load capacitance.
*
* xtal_load_c - Crystal load capacitance. Use the SI5351_CRYSTAL_LOAD_*PF
* defines in the header file
* ref_osc_freq - Crystal/reference oscillator frequency in 1 Hz increments.
* Defaults to 25000000 if a 0 is used here.
*
*/
void Si5351::init(uint8_t xtal_load_c, uint32_t ref_osc_freq)
{
// Start I2C comms
Wire.begin();
// Set crystal load capacitance
si5351_write(SI5351_CRYSTAL_LOAD, xtal_load_c);
// Change the ref osc freq if different from default
if (ref_osc_freq != 0)
{
xtal_freq = ref_osc_freq;
}
// Initialize the CLK outputs according to flowchart in datasheet
// First, turn them off
si5351_write(16, 0x80);
si5351_write(17, 0x80);
si5351_write(18, 0x80);
// Turn the clocks back on...
si5351_write(16, 0x0c);
si5351_write(17, 0x0c);
si5351_write(18, 0x0c);
// Then reset the PLLs
pll_reset(SI5351_PLLA);
pll_reset(SI5351_PLLB);
}
/*
* set_freq(uint64_t freq, uint64_t pll_freq, enum si5351_clock output)
*
* Sets the clock frequency of the specified CLK output
*
* freq - Output frequency in Hz
* pll_freq - Frequency of the PLL driving the Multisynth
* Use a 0 to have the function choose a PLL frequency
* clk - Clock output
* (use the si5351_clock enum)
*/
uint8_t Si5351::set_freq(uint64_t freq, uint64_t pll_freq, enum si5351_clock clk)
{
struct Si5351RegSet ms_reg, pll_reg;
enum si5351_pll target_pll;
uint8_t write_pll = 0;
uint8_t reg_val;
uint8_t r_div = SI5351_OUTPUT_CLK_DIV_1;
uint8_t int_mode = 0;
uint8_t div_by_4 = 0;
// PLL bounds checking
if(pll_freq != 0)
{
if ((pll_freq < SI5351_PLL_VCO_MIN * SI5351_FREQ_MULT) || (pll_freq > SI5351_PLL_VCO_MAX * SI5351_FREQ_MULT))
{
return 1;
}
}
// Lower bounds check
if(freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT)
{
freq = SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT;
}
// Upper bounds check
if(freq > SI5351_MULTISYNTH_MAX_FREQ * SI5351_FREQ_MULT)
{
freq = SI5351_MULTISYNTH_MAX_FREQ * SI5351_FREQ_MULT;
}
// Select the proper R div value
r_div = select_r_div(&freq);
// Calculate the synth parameters
// If pll_freq is 0 and freq < 150 MHz, let the algorithm pick a PLL frequency
if((pll_freq) && (freq < SI5351_MULTISYNTH_DIVBY4_FREQ * SI5351_FREQ_MULT))
{
multisynth_calc(freq, pll_freq, &ms_reg);
write_pll = 0;
div_by_4 = 0;
int_mode = 0;
switch(clk)
{
case SI5351_CLK0:
clk0_freq = freq;
break;
case SI5351_CLK1:
clk1_freq = freq;
break;
case SI5351_CLK2:
clk2_freq = freq;
break;
default:
break;
}
}
else
{
// The PLL must be calculated and set by firmware when 150 MHz <= freq <= 160 MHz
if(freq >= SI5351_MULTISYNTH_DIVBY4_FREQ * SI5351_FREQ_MULT)
{
pll_freq = multisynth_calc(freq, 0, &ms_reg);
write_pll = 1;
div_by_4 = 1;
int_mode = 1;
}
// Determine which PLL to use
// CLK0 gets PLLA, CLK1 gets PLLB
// CLK2 gets PLLB if necessary
// Only good for Si5351A3 variant at the moment
switch(clk)
{
case SI5351_CLK0:
pll_freq = multisynth_calc(freq, 0, &ms_reg);
target_pll = SI5351_PLLA;
write_pll = 1;
set_ms_source(SI5351_CLK0, SI5351_PLLA);
plla_freq = pll_freq;
clk0_freq = freq;
break;
case SI5351_CLK1:
// Check to see if PLLB is locked due to other output being < 1.024 MHz or >= 112.5 MHz
if(lock_pllb == SI5351_CLK2)
{
// We can't have a 2nd output < 1.024 MHz or >= 112.5 MHz on the same PLL unless exact same freq, so exit
if((freq >= SI5351_MULTISYNTH_SHARE_MAX * SI5351_FREQ_MULT
|| freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 128) && freq != clk2_freq)
{
clk1_freq = 0;
return 1;
}
// Else, set multisynth to same PLL freq as CLK2
else
{
pll_freq = pllb_freq;
multisynth_calc(freq, pll_freq, &ms_reg);
write_pll = 0;
set_ms_source(SI5351_CLK1, SI5351_PLLB);
}
}
else
{
pllb_freq = pll_freq;
pll_freq = multisynth_calc(freq, 0, &ms_reg);
write_pll = 1;
set_ms_source(SI5351_CLK1, SI5351_PLLB);
}
if(freq >= SI5351_MULTISYNTH_SHARE_MAX * SI5351_FREQ_MULT || freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 128)
{
lock_pllb = SI5351_CLK1;
// Recalc and rewrite the multisynth parameters on CLK2
if(clk2_freq != 0)
{
struct Si5351RegSet ms_temp_reg;
r_div = select_r_div(&clk2_freq);
multisynth_calc(clk2_freq, pllb_freq, &ms_temp_reg);
set_ms(SI5351_CLK2, ms_temp_reg, 0, r_div, 0);
}
}
else
{
lock_pllb = SI5351_CLKNONE;
}
target_pll = SI5351_PLLB;
clk1_freq = freq;
break;
case SI5351_CLK2:
// Check to see if PLLB is locked due to other output being < 1.024 MHz or >= 112.5 MHz
if(lock_pllb == SI5351_CLK1)
{
// We can't have a 2nd output < 1.024 MHz or >= 112.5 MHz on the same PLL unless exact same freq, so exit
if((freq >= SI5351_MULTISYNTH_SHARE_MAX * SI5351_FREQ_MULT
|| freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 128) && freq != clk2_freq)
{
clk2_freq = 0;
return 1;
}
// Else, set multisynth to same PLL freq as CLK1
else
{
pll_freq = pllb_freq;
multisynth_calc(freq, pll_freq, &ms_reg);
write_pll = 0;
set_ms_source(SI5351_CLK2, SI5351_PLLB);
}
}
// need to account for CLK2 set before CLK1
else
{
pllb_freq = pll_freq;
pll_freq = multisynth_calc(freq, 0, &ms_reg);
write_pll = 1;
set_ms_source(SI5351_CLK2, SI5351_PLLB);
}
if(freq >= SI5351_MULTISYNTH_SHARE_MAX * SI5351_FREQ_MULT || freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 128)
{
lock_pllb = SI5351_CLK2;
if(clk1_freq != 0)
{
// Recalc and rewrite the multisynth parameters on CLK1
struct Si5351RegSet ms_temp_reg;
r_div = select_r_div(&clk1_freq);
multisynth_calc(clk1_freq, pllb_freq, &ms_temp_reg);
set_ms(SI5351_CLK1, ms_temp_reg, 0, r_div, 0);
}
}
else
{
lock_pllb = SI5351_CLKNONE;
}
target_pll = SI5351_PLLB;
clk2_freq = freq;
break;
default:
return 1;
}
}
// Set multisynth registers (MS must be set before PLL)
set_ms(clk, ms_reg, int_mode, r_div, div_by_4);
// Set PLL if necessary
if(write_pll == 1)
{
set_pll(pll_freq, target_pll);
}
return 0;
}
/*
* set_pll(uint64_t pll_freq, enum si5351_pll target_pll)
*
* Set the specified PLL to a specific oscillation frequency
*
* pll_freq - Desired PLL frequency
* target_pll - Which PLL to set
* (use the si5351_pll enum)
*/
void Si5351::set_pll(uint64_t pll_freq, enum si5351_pll target_pll)
{
struct Si5351RegSet pll_reg;
pll_calc(pll_freq, &pll_reg, ref_correction);
// Derive the register values to write
// Prepare an array for parameters to be written to
uint8_t *params = new uint8_t[20];
uint8_t i = 0;
uint8_t temp;
// Registers 26-27
temp = ((pll_reg.p3 >> 8) & 0xFF);
params[i++] = temp;
temp = (uint8_t)(pll_reg.p3 & 0xFF);
params[i++] = temp;
// Register 28
temp = (uint8_t)((pll_reg.p1 >> 16) & 0x03);
params[i++] = temp;
// Registers 29-30
temp = (uint8_t)((pll_reg.p1 >> 8) & 0xFF);
params[i++] = temp;
temp = (uint8_t)(pll_reg.p1 & 0xFF);
params[i++] = temp;
// Register 31
temp = (uint8_t)((pll_reg.p3 >> 12) & 0xF0);
temp += (uint8_t)((pll_reg.p2 >> 16) & 0x0F);
params[i++] = temp;
// Registers 32-33
temp = (uint8_t)((pll_reg.p2 >> 8) & 0xFF);
params[i++] = temp;
temp = (uint8_t)(pll_reg.p2 & 0xFF);
params[i++] = temp;
// Write the parameters
if(target_pll == SI5351_PLLA)
{
si5351_write_bulk(SI5351_PLLA_PARAMETERS, i, params);
}
else if(target_pll == SI5351_PLLB)
{
si5351_write_bulk(SI5351_PLLB_PARAMETERS, i, params);
}
delete params;
}
/*
* set_ms(enum si5351_clock clk, struct Si5351RegSet ms_reg, uint8_t int_mode, uint8_t r_div, uint8_t div_by_4)
*
* Set the specified multisynth parameters. Not normally needed, but public for advanced users.
*
* clk - Clock output
* (use the si5351_clock enum)
* int_mode - Set integer mode
* Set to 1 to enable, 0 to disable
* r_div - Desired r_div ratio
* div_by_4 - Set Divide By 4 mode
* Set to 1 to enable, 0 to disable
*/
void Si5351::set_ms(enum si5351_clock clk, struct Si5351RegSet ms_reg, uint8_t int_mode, uint8_t r_div, uint8_t div_by_4)
{
uint8_t *params = new uint8_t[20];
uint8_t i = 0;
uint8_t temp;
uint8_t reg_val;
// Registers 42-43 for CLK0
temp = (uint8_t)((ms_reg.p3 >> 8) & 0xFF);
params[i++] = temp;
temp = (uint8_t)(ms_reg.p3 & 0xFF);
params[i++] = temp;
// Register 44 for CLK0
reg_val = si5351_read((SI5351_CLK0_PARAMETERS + 2) + (clk * 8));
reg_val &= ~(0x03);
temp = reg_val | ((uint8_t)((ms_reg.p1 >> 16) & 0x03));
params[i++] = temp;
// Registers 45-46 for CLK0
temp = (uint8_t)((ms_reg.p1 >> 8) & 0xFF);
params[i++] = temp;
temp = (uint8_t)(ms_reg.p1 & 0xFF);
params[i++] = temp;
// Register 47 for CLK0
temp = (uint8_t)((ms_reg.p3 >> 12) & 0xF0);
temp += (uint8_t)((ms_reg.p2 >> 16) & 0x0F);
params[i++] = temp;
// Registers 48-49 for CLK0
temp = (uint8_t)((ms_reg.p2 >> 8) & 0xFF);
params[i++] = temp;
temp = (uint8_t)(ms_reg.p2 & 0xFF);
params[i++] = temp;
// Write the parameters
switch(clk)
{
case SI5351_CLK0:
si5351_write_bulk(SI5351_CLK0_PARAMETERS, i, params);
break;
case SI5351_CLK1:
si5351_write_bulk(SI5351_CLK1_PARAMETERS, i, params);
break;
case SI5351_CLK2:
si5351_write_bulk(SI5351_CLK2_PARAMETERS, i, params);
break;
case SI5351_CLK3:
si5351_write_bulk(SI5351_CLK3_PARAMETERS, i, params);
break;
case SI5351_CLK4:
si5351_write_bulk(SI5351_CLK4_PARAMETERS, i, params);
break;
case SI5351_CLK5:
si5351_write_bulk(SI5351_CLK5_PARAMETERS, i, params);
break;
case SI5351_CLK6:
si5351_write_bulk(SI5351_CLK6_PARAMETERS, i, params);
break;
case SI5351_CLK7:
si5351_write_bulk(SI5351_CLK7_PARAMETERS, i, params);
break;
}
set_int(clk, int_mode);
ms_div(clk, r_div, div_by_4);
delete params;
}
/*
* output_enable(enum si5351_clock clk, uint8_t enable)
*
* Enable or disable a chosen output
* clk - Clock output
* (use the si5351_clock enum)
* enable - Set to 1 to enable, 0 to disable
*/
void Si5351::output_enable(enum si5351_clock clk, uint8_t enable)
{
uint8_t reg_val;
reg_val = si5351_read(SI5351_OUTPUT_ENABLE_CTRL);
if(enable == 1)
{
reg_val &= ~(1<<(uint8_t)clk);
}
else
{
reg_val |= (1<<(uint8_t)clk);
}
si5351_write(SI5351_OUTPUT_ENABLE_CTRL, reg_val);
}
/*
* drive_strength(enum si5351_clock clk, enum si5351_drive drive)
*
* Sets the drive strength of the specified clock output
*
* clk - Clock output
* (use the si5351_clock enum)
* drive - Desired drive level
* (use the si5351_drive enum)
*/
void Si5351::drive_strength(enum si5351_clock clk, enum si5351_drive drive)
{
uint8_t reg_val;
const uint8_t mask = 0x03;
reg_val = si5351_read(SI5351_CLK0_CTRL + (uint8_t)clk);
reg_val &= ~(mask);
switch(drive)
{
case SI5351_DRIVE_2MA:
reg_val |= 0x00;
break;
case SI5351_DRIVE_4MA:
reg_val |= 0x01;
break;
case SI5351_DRIVE_6MA:
reg_val |= 0x02;
break;
case SI5351_DRIVE_8MA:
reg_val |= 0x03;
break;
default:
break;
}
si5351_write(SI5351_CLK0_CTRL + (uint8_t)clk, reg_val);
}
/*
* update_status(void)
*
* Call this to update the status structs, then access them
* via the dev_status and dev_int_status global variables.
*
* See the header file for the struct definitions. These
* correspond to the flag names for registers 0 and 1 in
* the Si5351 datasheet.
*/
void Si5351::update_status(void)
{
update_sys_status(&dev_status);
update_int_status(&dev_int_status);
}
/*
* set_correction(int32_t corr)
*
* Use this to set the oscillator correction factor to
* EEPROM. This value is a signed 32-bit integer of the
* parts-per-billion value that the actual oscillation
* frequency deviates from the specified frequency.
*
* The frequency calibration is done as a one-time procedure.
* Any desired test frequency within the normal range of the
* Si5351 should be set, then the actual output frequency
* should be measured as accurately as possible. The
* difference between the measured and specified frequencies
* should be calculated in Hertz, then multiplied by 10 in
* order to get the parts-per-billion value.
*
* Since the Si5351 itself has an intrinsic 0 PPM error, this
* correction factor is good across the entire tuning range of
* the Si5351. Once this calibration is done accurately, it
* should not have to be done again for the same Si5351 and
* crystal. The library will read the correction factor from
* EEPROM during initialization for use by the tuning
* algorithms.
*/
void Si5351::set_correction(int32_t corr)
{
ref_correction = corr;
}
/*
* set_phase(enum si5351_clock clk, uint8_t phase)
*
* clk - Clock output
* (use the si5351_clock enum)
* phase - 7-bit phase word
* (in units of VCO/4 period)
*
* Write the 7-bit phase register. This must be used
* with a user-set PLL frequency so that the user can
* calculate the proper tuning word based on the PLL period.
*/
void Si5351::set_phase(enum si5351_clock clk, uint8_t phase)
{
// Mask off the upper bit since it is reserved
phase = phase & 0b01111111;
si5351_write(SI5351_CLK0_PHASE_OFFSET + (uint8_t)clk, phase);
}
/*
* get_correction(void)
*
* Returns the oscillator correction factor stored
* in RAM.
*/
int32_t Si5351::get_correction(void)
{
return ref_correction;
}
/*
* pll_reset(enum si5351_pll target_pll)
*
* target_pll - Which PLL to reset
* (use the si5351_pll enum)
*
* Apply a reset to the indicated PLL.
*/
void Si5351::pll_reset(enum si5351_pll target_pll)
{
if(target_pll == SI5351_PLLA)
{
si5351_write(SI5351_PLL_RESET, SI5351_PLL_RESET_A);
}
else if(target_pll == SI5351_PLLB)
{
si5351_write(SI5351_PLL_RESET, SI5351_PLL_RESET_B);
}
}
/*
* set_ms_source(enum si5351_clock clk, enum si5351_pll pll)
*
* clk - Clock output
* (use the si5351_clock enum)
* pll - Which PLL to use as the source
* (use the si5351_pll enum)
*
* Set the desired PLL source for a multisynth.
*/
void Si5351::set_ms_source(enum si5351_clock clk, enum si5351_pll pll)
{
uint8_t reg_val;
reg_val = si5351_read(SI5351_CLK0_CTRL + (uint8_t)clk);
if(pll == SI5351_PLLA)
{
reg_val &= ~(SI5351_CLK_PLL_SELECT);
}
else if(pll == SI5351_PLLB)
{
reg_val |= SI5351_CLK_PLL_SELECT;
}
si5351_write(SI5351_CLK0_CTRL + (uint8_t)clk, reg_val);
}
/*
* set_int(enum si5351_clock clk, uint8_t int_mode)
*
* clk - Clock output
* (use the si5351_clock enum)
* enable - Set to 1 to enable, 0 to disable
*
* Set the indicated multisynth into integer mode.
*/
void Si5351::set_int(enum si5351_clock clk, uint8_t enable)
{
uint8_t reg_val;
reg_val = si5351_read(SI5351_CLK0_CTRL + (uint8_t)clk);
if(enable == 1)
{
reg_val |= (SI5351_CLK_INTEGER_MODE);
}
else
{
reg_val &= ~(SI5351_CLK_INTEGER_MODE);
}
si5351_write(SI5351_CLK0_CTRL + (uint8_t)clk, reg_val);
// Integer mode indication
switch(clk)
{
case SI5351_CLK0:
clk0_int_mode = enable;
break;
case SI5351_CLK1:
clk1_int_mode = enable;
break;
case SI5351_CLK2:
clk2_int_mode = enable;
break;
default:
break;
}
}
/*
* set_clock_pwr(enum si5351_clock clk, uint8_t pwr)
*
* clk - Clock output
* (use the si5351_clock enum)
* pwr - Set to 1 to enable, 0 to disable
*
* Enable or disable power to a clock output (a power
* saving feature).
*/
void Si5351::set_clock_pwr(enum si5351_clock clk, uint8_t pwr)
{
uint8_t reg_val, reg;
reg_val = si5351_read(SI5351_CLK0_CTRL + (uint8_t)clk);
if(pwr == 1)
{
reg_val &= 0b01111111;
}
else
{
reg_val |= 0b10000000;
}
si5351_write(SI5351_CLK0_CTRL + (uint8_t)clk, reg_val);
}
/*
* set_clock_invert(enum si5351_clock clk, uint8_t inv)
*
* clk - Clock output
* (use the si5351_clock enum)
* inv - Set to 1 to enable, 0 to disable
*
* Enable to invert the clock output waveform.
*/
void Si5351::set_clock_invert(enum si5351_clock clk, uint8_t inv)
{
uint8_t reg_val;
reg_val = si5351_read(SI5351_CLK0_CTRL + (uint8_t)clk);
if(inv == 1)
{
reg_val |= (SI5351_CLK_INVERT);
}
else
{
reg_val &= ~(SI5351_CLK_INVERT);
}
si5351_write(SI5351_CLK0_CTRL + (uint8_t)clk, reg_val);
}
/*
* set_clock_source(enum si5351_clock clk, enum si5351_clock_source src)
*
* clk - Clock output
* (use the si5351_clock enum)
* src - Which clock source to use for the multisynth
* (use the si5351_clock_source enum)
*
* Set the clock source for a multisynth (based on the options
* presented for Registers 16-23 in the Silicon Labs AN619 document).
* Choices are XTAL, CLKIN, MS0, or the multisynth associated with
* the clock output.
*/
void Si5351::set_clock_source(enum si5351_clock clk, enum si5351_clock_source src)
{
uint8_t reg_val;
reg_val = si5351_read(SI5351_CLK0_CTRL + (uint8_t)clk);
// Clear the bits first
reg_val &= ~(SI5351_CLK_INPUT_MASK);
switch(src)
{
case SI5351_CLK_SRC_XTAL:
reg_val |= (SI5351_CLK_INPUT_XTAL);
break;
case SI5351_CLK_SRC_CLKIN:
reg_val |= (SI5351_CLK_INPUT_CLKIN);
break;
case SI5351_CLK_SRC_MS0:
if(clk == SI5351_CLK0)
{
return;
}
reg_val |= (SI5351_CLK_INPUT_MULTISYNTH_0_4);
break;
case SI5351_CLK_SRC_MS:
reg_val |= (SI5351_CLK_INPUT_MULTISYNTH_N);
break;
default:
return;
}
si5351_write(SI5351_CLK0_CTRL + (uint8_t)clk, reg_val);
}
/*
* set_clock_disable(enum si5351_clock clk, enum si5351_clock_disable dis_state)
*
* clk - Clock output
* (use the si5351_clock enum)
* dis_state - Desired state of the output upon disable
* (use the si5351_clock_disable enum)
*
* Set the state of the clock output when it is disabled. Per page 27
* of AN619 (Registers 24 and 25), there are four possible values: low,
* high, high impedance, and never disabled.
*/
void Si5351::set_clock_disable(enum si5351_clock clk, enum si5351_clock_disable dis_state)
{
uint8_t reg_val, reg;
if (clk >= SI5351_CLK0 && clk <= SI5351_CLK3)
{
reg = SI5351_CLK3_0_DISABLE_STATE;
}
else if (clk >= SI5351_CLK0 && clk <= SI5351_CLK3)
{
reg = SI5351_CLK7_4_DISABLE_STATE;
}
reg_val = si5351_read(reg);
if (clk >= SI5351_CLK0 && clk <= SI5351_CLK3)
{
reg_val &= ~(0b11 << (clk * 2));
reg_val |= dis_state << (clk * 2);
}
else if (clk >= SI5351_CLK0 && clk <= SI5351_CLK3)
{
reg_val &= ~(0b11 << ((clk - 4) * 2));
reg_val |= dis_state << ((clk - 4) * 2);
}
si5351_write(reg, reg_val);
}
/*
* set_clock_fanout(enum si5351_clock_fanout fanout, uint8_t enable)
*
* fanout - Desired clock fanout
* (use the si5351_clock_fanout enum)
* enable - Set to 1 to enable, 0 to disable
*
* Use this function to enable or disable the clock fanout options
* for individual clock outputs. If you intend to output the XO or
* CLKIN on the clock outputs, enable this first.
*
* By default, only the Multisynth fanout is enabled at startup.
*/
void Si5351::set_clock_fanout(enum si5351_clock_fanout fanout, uint8_t enable)
{
uint8_t reg_val;
reg_val = si5351_read(SI5351_FANOUT_ENABLE);
switch(fanout)
{
case SI5351_FANOUT_CLKIN:
if(enable)
{
reg_val |= SI5351_CLKIN_ENABLE;
}
else
{
reg_val &= ~(SI5351_CLKIN_ENABLE);
}
break;
case SI5351_FANOUT_XO:
if(enable)
{
reg_val |= SI5351_XTAL_ENABLE;
}
else
{
reg_val &= ~(SI5351_XTAL_ENABLE);
}
break;
case SI5351_FANOUT_MS:
if(enable)
{
reg_val |= SI5351_MULTISYNTH_ENABLE;
}
else
{
reg_val &= ~(SI5351_MULTISYNTH_ENABLE);
}
break;
}
si5351_write(SI5351_FANOUT_ENABLE, reg_val);
}
uint8_t Si5351::si5351_write_bulk(uint8_t addr, uint8_t bytes, uint8_t *data)
{
Wire.beginTransmission(SI5351_BUS_BASE_ADDR);
Wire.write(addr);
for(int i = 0; i < bytes; i++)
{
Wire.write(data[i]);
}
Wire.endTransmission();
}
uint8_t Si5351::si5351_write(uint8_t addr, uint8_t data)
{
Wire.beginTransmission(SI5351_BUS_BASE_ADDR);
Wire.write(addr);
Wire.write(data);
Wire.endTransmission();
}
uint8_t Si5351::si5351_read(uint8_t addr)
{
uint8_t reg_val;
Wire.beginTransmission(SI5351_BUS_BASE_ADDR);
Wire.write(addr);
Wire.endTransmission();
Wire.requestFrom(SI5351_BUS_BASE_ADDR, 1, false);
while(Wire.available())
{
reg_val = Wire.read();
}
return reg_val;
}
/*********************/
/* Private functions */
/*********************/
uint64_t Si5351::pll_calc(uint64_t freq, struct Si5351RegSet *reg, int32_t correction)
{
uint64_t ref_freq = xtal_freq * SI5351_FREQ_MULT;
uint32_t a, b, c, p1, p2, p3;
uint64_t lltmp, rfrac, denom;
int64_t ref_temp;
// Factor calibration value into nominal crystal frequency
// Measured in parts-per-billion
ref_freq = ref_freq + (int32_t)((((((int64_t)correction) << 31) / 1000000000LL) * ref_freq) >> 31);
// PLL bounds checking
if (freq < SI5351_PLL_VCO_MIN * SI5351_FREQ_MULT)
{
freq = SI5351_PLL_VCO_MIN * SI5351_FREQ_MULT;
}
if (freq > SI5351_PLL_VCO_MAX * SI5351_FREQ_MULT)
{
freq = SI5351_PLL_VCO_MAX * SI5351_FREQ_MULT;
}
// Determine integer part of feedback equation
a = freq / ref_freq;
if (a < SI5351_PLL_A_MIN)
{
freq = ref_freq * SI5351_PLL_A_MIN;
}
if (a > SI5351_PLL_A_MAX)
{
freq = ref_freq * SI5351_PLL_A_MAX;
}
// Find best approximation for b/c = fVCO mod fIN
denom = 1000ULL * 1000ULL;
lltmp = freq % ref_freq;
lltmp *= denom;
do_div(lltmp, ref_freq);
rfrac = lltmp;
b = (((uint64_t)(freq % ref_freq)) * RFRAC_DENOM) / ref_freq;
c = b ? RFRAC_DENOM : 1;
// Calculate parameters
p1 = 128 * a + ((128 * b) / c) - 512;
p2 = 128 * b - c * ((128 * b) / c);
p3 = c;
// Recalculate frequency as fIN * (a + b/c)
lltmp = ref_freq;
lltmp *= b;
do_div(lltmp, c);
freq = lltmp;
freq += ref_freq * a;
reg->p1 = p1;
reg->p2 = p2;
reg->p3 = p3;
return freq;
}
uint64_t Si5351::multisynth_calc(uint64_t freq, uint64_t pll_freq, struct Si5351RegSet *reg)
{
uint64_t lltmp;
uint32_t a, b, c, p1, p2, p3;
uint8_t divby4;
uint8_t ret_val = 0;
// Multisynth bounds checking
if (freq > SI5351_MULTISYNTH_MAX_FREQ * SI5351_FREQ_MULT)
{
freq = SI5351_MULTISYNTH_MAX_FREQ * SI5351_FREQ_MULT;
}
if (freq < SI5351_MULTISYNTH_MIN_FREQ * SI5351_FREQ_MULT)
{
freq = SI5351_MULTISYNTH_MIN_FREQ * SI5351_FREQ_MULT;
}
divby4 = 0;
if (freq >= SI5351_MULTISYNTH_DIVBY4_FREQ * SI5351_FREQ_MULT)
{
divby4 = 1;
}
if(pll_freq == 0)
{
// Find largest integer divider for max
// VCO frequency and given target frequency
if(divby4 == 0)
{
lltmp = SI5351_PLL_VCO_MAX * SI5351_FREQ_MULT;
do_div(lltmp, freq);
a = (uint32_t)lltmp;
}
else
{
a = 4;
}
b = 0;
c = 1;
pll_freq = a * freq;
}
else
{
// Preset PLL, so return the actual freq for these params instead of PLL freq
ret_val = 1;
// Determine integer part of feedback equation
a = pll_freq / freq;
if (a < SI5351_MULTISYNTH_A_MIN)
{
freq = pll_freq / SI5351_MULTISYNTH_A_MIN;
}
if (a > SI5351_MULTISYNTH_A_MAX)
{
freq = pll_freq / SI5351_MULTISYNTH_A_MAX;
}
b = (pll_freq % freq * RFRAC_DENOM) / freq;
c = b ? RFRAC_DENOM : 1;
}
// Calculate parameters
if (divby4 == 1)
{
p3 = 1;
p2 = 0;
p1 = 0;
}
else
{
p1 = 128 * a + ((128 * b) / c) - 512;
p2 = 128 * b - c * ((128 * b) / c);
p3 = c;
}
reg->p1 = p1;
reg->p2 = p2;
reg->p3 = p3;
if(ret_val == 0)
{
return pll_freq;
}
else
{
return freq;
}
}
void Si5351::update_sys_status(struct Si5351Status *status)
{
uint8_t reg_val = 0;
reg_val = si5351_read(SI5351_DEVICE_STATUS);
// Parse the register
status->SYS_INIT = (reg_val >> 7) & 0x01;
status->LOL_B = (reg_val >> 6) & 0x01;
status->LOL_A = (reg_val >> 5) & 0x01;
status->LOS = (reg_val >> 4) & 0x01;
status->REVID = reg_val & 0x03;
}
void Si5351::update_int_status(struct Si5351IntStatus *int_status)
{
uint8_t reg_val = 0;
reg_val = si5351_read(SI5351_DEVICE_STATUS);
// Parse the register
int_status->SYS_INIT_STKY = (reg_val >> 7) & 0x01;
int_status->LOL_B_STKY = (reg_val >> 6) & 0x01;
int_status->LOL_A_STKY = (reg_val >> 5) & 0x01;
int_status->LOS_STKY = (reg_val >> 4) & 0x01;
}
void Si5351::ms_div(enum si5351_clock clk, uint8_t r_div, uint8_t div_by_4)
{
uint8_t reg_val, reg_addr;
switch(clk)
{
case SI5351_CLK0:
reg_addr = SI5351_CLK0_PARAMETERS + 2;
break;
case SI5351_CLK1:
reg_addr = SI5351_CLK1_PARAMETERS + 2;
break;
case SI5351_CLK2:
reg_addr = SI5351_CLK2_PARAMETERS + 2;
break;
case SI5351_CLK3:
reg_addr = SI5351_CLK3_PARAMETERS + 2;
break;
case SI5351_CLK4:
reg_addr = SI5351_CLK4_PARAMETERS + 2;
break;
case SI5351_CLK5:
reg_addr = SI5351_CLK5_PARAMETERS + 2;
break;
case SI5351_CLK6:
return;
case SI5351_CLK7:
return;
}
reg_val = si5351_read(reg_addr);
// Clear the relevant bits
reg_val &= ~(0x7c);
if(div_by_4 == 0)
{
reg_val &= ~(SI5351_OUTPUT_CLK_DIVBY4);
}
else
{
reg_val |= (SI5351_OUTPUT_CLK_DIVBY4);
}
reg_val |= (r_div << SI5351_OUTPUT_CLK_DIV_SHIFT);
si5351_write(reg_addr, reg_val);
}
uint8_t Si5351::select_r_div(uint64_t *freq)
{
uint8_t r_div = SI5351_OUTPUT_CLK_DIV_1;
// Choose the correct R divider
if((*freq >= SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT) && (*freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 2))
{
r_div = SI5351_OUTPUT_CLK_DIV_128;
*freq *= 128ULL;
}
else if((*freq >= SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 2) && (*freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 4))
{
r_div = SI5351_OUTPUT_CLK_DIV_64;
*freq *= 64ULL;
}
else if((*freq >= SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 4) && (*freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 8))
{
r_div = SI5351_OUTPUT_CLK_DIV_32;
*freq *= 32ULL;
}
else if((*freq >= SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 8) && (*freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 16))
{
r_div = SI5351_OUTPUT_CLK_DIV_16;
*freq *= 16ULL;
}
else if((*freq >= SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 16) && (*freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 32))
{
r_div = SI5351_OUTPUT_CLK_DIV_8;
*freq *= 8ULL;
}
else if((*freq >= SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 32) && (*freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 64))
{
r_div = SI5351_OUTPUT_CLK_DIV_4;
*freq *= 4ULL;
}
else if((*freq >= SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 64) && (*freq < SI5351_CLKOUT_MIN_FREQ * SI5351_FREQ_MULT * 128))
{
r_div = SI5351_OUTPUT_CLK_DIV_2;
*freq *= 2ULL;
}
return r_div;
}
Reference in New Issue Copy Permalink